Diamond Pro Stone Cut®

Availability MIDSOUTH GULF

Renowned for its rough-hewn face and earthen tones, the Diamond Pro Stone Cut® retaining wall system imparts a rich, faceted appearance not commonly found in commercial retaining walls.

The performance characteristics make it the proven solution for tall walls, Department of Transportation projects, commercial developments, water applications and other critical wall needs.

Features:

  • Original rear-lip locator
  • Taller walls can be built using geosynthetic reinforcement or the Anchorplex™ retaining wall system when designed by a qualified engineer
  • Minimum outside radius, measured on the top course to the front of the units: 4 feet
  • Minimum inside radius, measured on the base course to the front of the units: 7 feet

The Diamond Pro Stone Cut® wall system is manufactured by Block USA in Alabama and Gulf Coast markets under license from Anchor Wall Systems, Inc.

  • Diamond Pro Stone Cut

    Diamond Pro Stone Cut

    Height:
    8"
    Front Length:
    18"
    Depth:
    12"
    Weight:
    77 lbs.
    Coverage:
    1.0 sq. ft.
    Setback:
    1"/7.1º

    Actual dimensions and weights may vary from these approximate values due to variations in manufacturing processes. Specifications may change without notice. See your Hardscapes USA representative for details, color options, block dimensions and additional information.

Copyright © 2018 Block USA - All rights reserved.
All other trademarks, service marks, product names and logos appearing on this site are the property of their respective owners. Not all products available in all markets.